- 1 Best Stainless Steel Sinks Reviews, Tips & Buying Guides
- 2 Buying Guides – How To Choose The Best Stainless Steel Sinks?
- 3 FAQs
- 3.1 What Is A Stainless Steel Sink?
- 3.2 What Should I Not Use On Stainless Steel Sink?
- 3.3 How Much Does A Stainless Steel Sink Cost?
- 3.4 How Do I Get A Stainless Steel Sink To Shine?
- 3.5 What Is A Good Gauge For Stainless Steel Sinks?
- 3.6 What’s The Difference Between 18 And 16 Gauge?
- 3.7 How To Clean Stainless Steel Undermount Kitchen Sink?
- 3.8 Are Stainless Steel Sinks Easy To Install?
- 3.9 How Do I Prevent Rust From Forming On My Stainless Steel Sink?
- 3.10 How To Clean A Stainless Steel Sink: Step-By-Step Guide
- 3.11 How To Clean Stainless Steel Sink Hard Water Stains?
- 3.12 How Do You Measure A Stainless Steel Sink?
- 3.13 How To Remove Chemical Stains From Stainless Steel Sink?
- 3.14 How Are Stainless Steel Sinks Configured?
- 3.15 How Do I Get A Stainless Steel Sink To Shine?
- 3.16 How To Repair A Scratch On Stainless Steel Sink?
- 3.17 How Do You Install A Stainless Steel Sink?
- 3.18 Do I really need a stainless steel sink?
- 3.19 How is this material different than others?
- 3.20 Are they expensive?
- 3.21 What are their disadvantages?
- 3.22 How do I prolong its life?
- 4 Conclusion
Best Stainless Steel Sinks Reviews, Tips & Buying Guides
Buying Guides – How To Choose The Best Stainless Steel Sinks?
A sink is among the things you wouldn’t think of buying every day. But when you do need to buy one, it becomes an imperative task to make sure you are making a good decision about what type of sink to buy and where to buy from. Here are some factors that will help you make a better choice:
Size – Sinks are usually sized according to the number of holes they have. The more the holes, the more is their utility. Also, there are sinks that are made for specific purposes mainly due to the geometry of their design. For example, vessel sinks tend to be shallow and wide to allow maximum usage of space as opposed to other types of sink designs which would not provide you with much room for washing large vessels or items.
Brands – When you are buying a sink, think about the brand. Pay attention to the service that each company provides and what its customers have to say about it. It is recommended that you choose a company that has an established history of providing quality products along with proper after-sales services for its products.
Design – It is a good idea to know the design of the sink you want before going shopping for it. One reason behind this is that not every store carries all designs and brands of sinks, so you need to have some knowledge about what kind of sink will fit best in your bathroom or kitchen. So you should look at designs, size options, features, colors, etc. of the sink you are interested in before going out to look for it.
Shape – Sinks come in a variety of shapes and designs. Some are made specifically for specific purposes, while others can perform multiple functions.
Gauge – The thickness of the material can affect how long you intend to use it. If you are looking for a sink that will last longer, opt for one made of thick gauge stainless steel. This way, it will last much longer than if you had bought another type of sink.
Strength – You do not want to buy a sink only to find it bending or dented after a few days. Therefore, you need to make sure that the sink you are considering buying is made from a very strong material.
Sink Type Or Mounting Style – Once again, consider the type of sink you want and then look for a place that stocks that particular style.
Number Of Bowls – If you want a sink that can be used for multiple purposes, then opt for one with several bowls.
Kitchen Style – You may want to match the design of your sink with that of other kitchen appliances or fixtures.
Mounting Style – If you are looking for a sink to install in your kitchen, then consider buying one that can be mounted on the counter. Or if it is made specifically for installation in bathrooms, then look at the type of mounting it needs.
Finish – Stainless steel can be finished in many different ways, including brushed surface finish, polished surface gloss, or matte. Also, you should look at the cleanability of the finish, since it will get dirty over time and will require washing to keep it in good condition.
Holes For Faucet – The number of holes a sink has can be a clear indication of the type and style of faucet it is compatible with. If you want to buy a new faucet for your new sink, make sure it fits perfectly in the template provided by the manufacturer.
Installation – There are sinks that need more or less time for installation. If you are not very handy around the house, then it would be advisable to get a sink that you can install on your own. This will save money on hiring professionals and make sure that the job is done correctly.
Water Flow – If there are certain areas in your kitchen or bathroom that are hard to reach, then look for sinks that have water flow regulator valves. These can ensure that certain areas get an adequate flow of water while others do not.
Drain Position – If you are looking for a sink with a specific drain position, then make sure the sink offers this feature.
Self Draining – Some sinks are specifically designed to drain on their own without requiring any outside help. This is especially helpful if you live in areas where water is scarce or very expensive.
Plumbing Depth – It is important to know the depth of plumbing that drains into your sink. Some sinks can drain water up to six inches deep, but for some applications, you may need something deeper.
Soundproofing Layer – If you want your sink not to make sounds when water is flowing, then look for a sink that has been soundproofed during manufacturing.
Price – As with most other products, the price of a sink varies depending on its quality and finish. Therefore, you should compare different models to find one that is within your budget.
Warranty – The warranty provided by the manufacturer can help you save money in case of an issue. Most manufacturers provide warranties that last for some time after purchase. Therefore, you can save money on repairs by buying a sink with a longer warranty period.
Buying a new sink can be a very exciting experience, but it is also important to understand what specifications your sink needs. This way you can ensure that it is the perfect fit for your home.
What Is A Stainless Steel Sink?
A stainless steel sink is a kitchen sink made from stainless steel which is a corrosion-resistant alloy of iron and chromium. The chromium surface resists discoloration and staining, and the smooth reflective surface provides a hygienic surface.
What Should I Not Use On Stainless Steel Sink?
You should not use strong acidic or alkaline cleaners on your stainless steel sink. You should also avoid harsh abrasives, as these might scratch the surface and cause unwanted dullness.
How Much Does A Stainless Steel Sink Cost?
The cost of a stainless steel sink varies depending on the style and manufacturer. However, it generally falls between $50 to $300 for standard-sized models, which is much less than those made from porcelain-enameled cast iron, copper, or copper composite such as under-mount sinks for example.
How Do I Get A Stainless Steel Sink To Shine?
The shiny appearance of your stainless steel sink is from the reflections off of the surface. You can get a streak-free shine by rinsing with hot water and wiping it down immediately after using soap or other cleaning products on it. If you have smudges, use a microfiber cloth to buff them out.
What Is A Good Gauge For Stainless Steel Sinks?
The thickness or gauge of the stainless steel used to make your sink determines its durability. A good gauge for a kitchen sink is 16-18 gauge, which means that it is 0.079 inches thick.
Who Makes The Best Stainless Steel Kitchen Sinks?
When you are choosing a stainless steel sink, it is important to check its quality. Quality sinks are made from high-quality and corrosion-resistant stainless steel and have smooth shiny surfaces which don’t chip or stain easily. The most popular brands of stainless steel kitchen sinks include:
- Faucet Face
- Price Pfister
- Delta Faucet Company
What’s The Difference Between 18 And 16 Gauge?
Generally, 18-gauge stainless steel sinks are more expensive than 16-gauge ones. The weight difference between the two is not significant enough to justify the price hike. However, an 18-gauge sink has a thicker body which could make it last longer.
How To Clean Stainless Steel Undermount Kitchen Sink?
It is easy to clean a stainless steel sink. You do not have to worry about stains or watermarks on this surface. You can simply wipe it down with warm soapy water and dry it off immediately afterward. Do not use bleach, as this will cause rusty-looking spots on your sink.
Are Stainless Steel Sinks Easy To Install?
The ease of installation will depend on whether or not you purchase an under-mount sink. For instance, if you plan to install an under-mounted kitchen sink that requires no additional plumbing work, then all you should do is set it into place without adding any accessories combined with stainless steel fasteners through its mounting holes. However, for other models such as drop-in sinks which require installing accessory frames before installing, there might be more labor involved. Otherwise, installing either an undermount or drop-in stainless steel sink should be easy if you have the right tools and know-how.
How Do I Prevent Rust From Forming On My Stainless Steel Sink?
You can prevent rust from forming on your sink by wiping it clean with a microfiber cloth. However, you can also apply a little bit of oil to it before storing it for long periods of time. If rust does form, use 0000-grade steel wool to gently rub away the unwanted material until all that is left are shiny streaks. You may need to repeat this process several times to achieve desired results.
How To Clean A Stainless Steel Sink: Step-By-Step Guide
Check out this simple step-by-step guide on how to clean a stainless steel sink in your home. This will ensure that you keep it shiny and spotless for years to come :
- Disassemble the drain basket, brush with warm soapy water and rinse thoroughly with cold water.
- Use a soft cloth or sponge dipped in warm water containing mild dish soap to wipe down the surface of the sink until it is clean.
- Dry with towels immediately after cleaning .
- Repeat this procedure if needed.
- Clean the faucet using hot soapy water followed by rinsing it off immediately afterward.
- Remove all food particles stuck in between crevices, along cracks and around edges with a toothpick or dental floss .
- Check for any discoloration. If you notice any rust spots, wipe them off with steel wool dipped in detergent.
Some Discoloured Stainless Steel Sinks Are Easy To Fix
You should remove rust from your sink by applying a little bit of citrus juice followed by polishing it up with lemon oil. Take extra precautions while doing this since the acid involved might cause further damage to your sink. This solution should work for large areas of discoloration but if there are small stains, scrub gently using a toothbrush and baking soda for removal.
If these methods do not help, purchase some stainless steel cleaner at your local hardware store. Use gloves when handling the chemical so that you don’t get it on your skin or inhale its fumes. If any solution gets into your eyes, rinse them out thoroughly with clean water and consult a doctor immediately.
After cleaning the sink, do not forget to dry it off using paper towels or kitchen rags. You may also use a hairdryer for this purpose if need be.
Do not expose stainless steel to harsh chemicals such as bleach since these will cause irreversible damage to your sink. The same goes for abrasive scrubbing pads which could leave scratches. Also, avoid putting in too much heat on its surface when doing dishes in order to prevent warping.
How To Clean Stainless Steel Sink Hard Water Stains?
To clean hard water stains from your stainless steel sink, soak a cotton cloth in vinegar and sprinkle baking soda on top. Use this solution to wipe down the entire surface of the sink. You should notice some bubbling action which means that it is working. Dry off with paper towels or kitchen rags afterward.
If you find it difficult to remove small particles around crevices, increase the strength of this mixture by adding 3 tablespoons of dishwashing liquid to 1 cup of vinegar. Use old toothbrushes, q-tips, or toothpicks for cleaning these areas.
How Do You Measure A Stainless Steel Sink?
If you want to buy a sink that matches the one already in your kitchen, here is what you need to do:
Step 1: Turn off electricity and water supply. These steps should be taken before doing anything else since day-to-day living depends on these utilities.
Step 2: Choose a measuring tape and get your dimensions right. Measure the distance between the underside of the cabinet and the countertop. Also, take note of its width, length, and depth. Write these down for future reference.
You should also get accurate measurements if you are planning to get new units for replacing damaged parts such as sinks or faucets.
It is vital that you use this information when buying accessories so they will fit in place perfectly when you get them home.
Step 3: Make sure that there is at least 1/8 inch to spare in order to prevent water leaks. If needed, use a drill or hacksaw to cut the pipes so that it would be possible for your new sink to fit in its intended position. This might be necessary especially if you are replacing an existing appliance.
Drive screws through the knockout pinholes on the faucet’s flange and attach it to your countertop using lag bolts with washers. Use wrenches for tightening purposes. Prepare the sink by screwing undermounts into its base. You should also do this when it comes time for installing new appliance accessories such as faucets and soap dispensers.
Place the sink on top of the countertop. Make sure that there are no gaps between them by using your hand or by pulling it back. This would indicate if there is a problem with the installation. If all looks well, attach the tailpiece to connect them together.
Step 5: Turn on electricity and water supply to finish up.
How To Remove Chemical Stains From Stainless Steel Sink?
To remove chemical stains from stainless steel sinks use household cleansers like borax or baking soda. Apply small quantities on top of the affected area and leave it to sit overnight. Scrub with mild abrasives in the morning.
You should also try these methods for cleaning sinks:
Use hydrogen peroxide which is available in drugstores for bleaching purposes. Combine this product with other substances like baking soda, vinegar, or salt. Use a coarse brush to scrub off grease deposits after applying them onto its surface.
How Are Stainless Steel Sinks Configured?
You can opt for sinks that are pre-tapped which is done in factories. These units would have all the necessary holes, fixtures, and drains built into their design. However, you might need to get extra taps in order to produce your desired flow of water.
If you are looking for a more customizable solution, choose custom-made ones instead. You can even request additional features such as soap dispensers or drain boards when getting these units made.
How Do I Get A Stainless Steel Sink To Shine?
Here are some expert tips for getting your stainless steel sink to shine:
Start by plugging it with crumpled-up aluminum foil which must be covered in baking soda. This procedure cleans the surface of your sink. It also gives it a reflective sheen that would last longer.
Leave this for an hour before rinsing off with water. For more effective results, you can soak steel wool pads dipped in vinegar overnight to remove oxidized stains.
It is also possible to make use of ketchup because it contains acids that can cut through grease deposits easily. After applying this product to the affected area, leave it inside overnight and wipe it out using moist kitchen paper towels. Rinse thoroughly after doing so.
How To Repair A Scratch On Stainless Steel Sink?
For minor scratch repairs, you can try makeshift solutions like toothpaste, steel wool, or nail polish remover cream which contains acetone. However, these might not be effective in completely removing slight blemishes so you must resort to professional methods if needed.
To repair severe scratches on stainless steel sinks, here are some do-it-yourself steps that you can follow:
Apply a thin layer of epoxy glue onto the affected area. Spread it around using a toothpick or similar small-sized tool. Make sure that you do not create any additional dents on the surface of your sink during the process.
Once dry, sand down the epoxy until its texture becomes smooth and polished. Apply metal polish to give it an extra shine.
How Do You Install A Stainless Steel Sink?
The process for installing a stainless steel sink is similar to how you would install other kitchen components such as faucets and dishwashers. Here are some important steps that you should follow:
Start by connecting the sink’s supply hoses, drain line assemblies, and water lines either through tightening or securing them together using locking nuts. Then you must connect these components to an available plumbing point near your cooking area. Ensure that everything is tight enough for optimal water flow.
If you are installing a double bowl stainless steel sink, fix its top bowl into place first then proceed with installing its bottom counterpart afterward. You may also need to install faucet drains onto the bowls if they are not already integrated into their designs.
Connect pop-up stoppers on each bowl after doing this. Use plumber’s putty underneath these fixtures for extra preventative measures against leaks. Then you can proceed to test water flow for leaks by turning on the tap. You must turn off the water completely if there are signs of leakage.
Make sure that you have tightened all connections before proceeding with installing a sink cover. Check if it fits your sink’s contour perfectly before tightly screwing its fasteners into place.
Follow these steps carefully to ensure that your sink is installed properly. Always use an extra hand when connecting tubing lines onto their fixtures using adjustable wrenches or pliers if needed.
If pot filler faucets, their drains, and pop-up stoppers from drainboards were included in your package, fix them into place after this step. However, you must not connect their respective supply hoses until you have finished doing so on other components of your sink.
Once everything is tightened, you can route supply hoses under the counter. This should be done by cutting out small holes on the backsplash before attaching their respective clips into place. After this, you can connect all valves to their respective outlets. You must then open up hot and cold water lines to allow air inside them to escape.
There are some instances when your kitchen sink might need installation services from a plumber especially if it is quite heavy or difficult to handle during the process. However, these steps will give you an idea of how stainless steel sinks can be installed without any hassles along the way. If possible, always try installing one yourself so troubleshooting problems will not take too much time for you.
Do I really need a stainless steel sink?
If you are thinking of renovating your kitchen and improving its décor, the time has come for you to consider replacing your old sink with a new one. While it is not that expensive, most people think twice before doing so. This is because they still think that their existing sinks can last long enough or if it is already functional. However, there are many reasons why you must get yourself a new stainless steel sink such as:
It will blend perfectly with modern kitchens – Stainless steel material used in making these fixtures is resistant to stains and scratches. You can place them next to other surfaces beside your cooking area without worrying about any discoloration issues caused by grease and spills. Plus, they usually come in a variety of finishes such as satin and polishing to fit the overall theme of your kitchen.
It is more functional – Aside from design, stainless steel sinks also offer other functions that make cooking and cleaning much easier for you. For instance, they can retain heat quite well so you must not worry about burning yourself when using them. Plus, their smooth surfaces don’t let dirt and grime stick on them making regular cleaning very simple.
Designer kitchens rely heavily on these fixtures for their décor because of their ability to blend with many themes without clashing with other elements inside the room. This means that it will complement any type of modern interior décor perfectly. It is already durable – Most commonly made out of 16-gauge or 18-gauge, stainless steel sinks are not only functional but also very durable. They also boast inert qualities that prevent water contaminants from sticking to your fixtures.
It can last for a long time without needing any major repair since rust won’t easily accumulate with these types of materials. It is easy to clean – Stainless steel sinks are manufactured in ways that make it easier for you to keep them looking clean and shiny all the time by using mild detergents and bleach whenever necessary. Simply wiping its surface will be enough so you don’t have to exert too much effort in keeping it spotless every day.
How is this material different than others?
There might be some people who still think that solid stainless steel still lacks the overall feel and convenience of a porcelain sink because it can be a bit heavy. However, this notion is already outdated as many stainless steel sinks are now lighter than ever before despite being made from non-magnetic metal materials. In fact, their weight only varies from 1 to 30 pounds depending on their overall sizes and thickness.
You might think that this type of sink will also retain heat, unlike other common types which make washing challenging for some people especially if they’re wearing thick clothes. Fortunately, there are still variations of stainless steel sinks available in the market known as “lighter-weight” or those manufactured using aluminum alloys. These models usually come with thicker gauge levels but about their lightness compared to solid types.
You can also opt for double-bowl stainless steel sinks which makes it easier for you to wash and rinse different dishes at the same time without having any problems with cross-contamination. Most of them also give you more room in case there are bigger utensils that need to be washed like pots and pans. They come with high backsplash levels so splatters will not reach other areas behind your fixtures.
Are they expensive?
While prices may vary depending on its thickness, size, material type, design features, overall quality, uniqueness, manufacturer’s reputation, and level of customer service provided by sellers, most stainless steel sinks are fairly priced between $100 up to $700 or even higher. You just have to choose carefully according to what you need in order to get the right value for your money. This type of sink is among one of the more affordable types available in the market nowadays.
They are also made available for people who want to install them on their own because most models come with detailed instructions, easy assembly parts, and tools needed. Some even come with complete mounting accessories so you only have to secure it on the wall or cabinet yourself. You can cut your costs even further if you opt for a used stainless steel sink that’s still in good condition.
What are their disadvantages?
Despite their advantages, there are still some disadvantages related to this type of sink. One of its most common problems is its high maintenance requirements due to its tendency to show scratches and scuffs more readily compared to other materials. It also shows fingerprints easily which cannot be washed off easily by normal means. Toothpaste stains will also be very hard if not removed completely once it dries on their surface.
Another problem is that some are made using poorer quality materials which may cause them to rust easily after exposure to water for a long time. You can solve this by choosing one that’s highly recommended by reliable sellers or repeat buyers of stainless steel sinks. It is also necessary to always clean your sink properly in order to prevent water impurities from building up eventually damaging the metal itself. If you don’t, regular cleaning will already become a chore due to these build-ups.
How do I prolong its life?
Always read product descriptions first before buying one because they usually contain important details about the product like its materials warranty, its installation requirements, manufacturer’s reputation, and product specification to avoid unexpected problems. Always check the sink materials before buying one because not all stainless steel sinks are made using top-quality materials. You can also make your own modifications or improvements if it already has scratches, dents, or other damages by using mild abrasive substances like baking soda and cooking oil.
You can prolong its life even further by cleaning it regularly to prevent water impurities from building up inside the sink which may cause corrosion later on. It is also necessary that you use soft sponges when cleaning your stainless steel sink so stubborn stains could be removed easily without damaging them. If none of these measures work for you, viewing product reviews, searching online forums, or seeking professional help may be your best option.
Stainless steel sinks are among the most popular types of bathroom and kitchen fixtures because of their durability, ease of cleaning, and affordability. It continues to be a highly recommended choice for homeowners due to its wide range of benefits that can suit any type of space. With proper research and careful considerations, you’ll surely find the best stainless steel sink that will work for your bathroom or kitchen needs.